Wednesday, April 21, 2021

Finnish T-34s

 

Completed tanks with extra turrets

I've completed the T-34s for my Finnish force. One of things I like about the Finns is you can easily use the same force for all three periods. Extra turrets were used, allowing be to field a variety of options:

  • 1x T-34/76 in EW
  • 2-3x T-34/76 in MW
  • 3x T-34/76 or 85 in LW
  • 1x T-34/85 HQ in LW
Inspiration for camo scheme

I used the above image as the inspiration for my camo scheme. The camo was done with Washable White (AK751). Snow effects on the tracks were done with AK8011. 


I decided not to build the proper Finnish fenders or headlights, but I did make a few modifications. 

Turret after rough texture has been added

This first was to create a rough, cast texture on the turrets. This was done by dabbing on plastic cement in little dots over the area and then stabbing at it with a stiff bristle brush. Make sure to use a brush that you don't care too much about for this (or maybe one you actually hate).

 

Before the white camo was applied. The T34/85 on the right had has addition grab handles added along the side and back of the hull.

The second bit I added was to add wire grab handles. I followed a procedure pretty close to this tutorial. I used 26 Gauge/.40mm floral wire. It comes with some sort of green coating on it that seems to take paint a little better than bare wire. 

Details of HQ tank. Many extra grab handles along the sides. The saw was removed.

Close up showing weathering on lower hull and tracks.

Close up of rear details. Mud and show added to lower hull and rear fenders. Good few of the grab handles added to top rear.

T-34/76 Platoon for MW or LW. You can also run a single tank in EW.

T-34/85 Platoon for LW.

HQ Unit for LW.

All the different winter camo schemes so far.



Thursday, April 15, 2021

Finnish HMGs

 Another infantry support platoon is complete. 

I'm still experimenting with AK8011 Snow. Previously, I had heavily water it down to get a smooth surface. However, it did not do a good job of creating "bulk"; the layers ended being rather thin.

In an attempt to solve the problem, this time I spread the snow material on with a brush and tried to smooth it out with a web brush. The results were...not great.

Overall, the snow looks too lumpy.

The final batch of infantry support weapons will be a trio of 120mm mortars. Last chance to get the snow "perfect".



Wednesday, April 7, 2021

Finnish Lahti L-39 Anti-tank Rifles

 This month I'm trying to wrap up some infantry support weapons for the Finns. 


 

Doing small batches of three or four teams also give me a change to try out different approaches to using AK8011 Snow, rather than Woodland Scenics Foam Putty. 

The closest guy is actually a tank rider. Figures with no base are placed in after the snow mix has partially cured.

Looks like the guy with the AT gun is missing his lower jaw. Don't do smokeless tobacco, kids.

The guy on the right was placed in the snow and wiggled around a little. It creates the impression of him moving his legs around, disturbing the snow.

Not sure if anyone will notice, but I discolored the heat shields with a little Reikland Fleshwash. Most reference photos I found showed similar discoloration (I guess from the heat?)